Almost every aspect of a house that is energy inefficient and is costing you money. The first step towards lower utility bills starts with a phone call to the local power company to schedule an inspection of your home for energy efficiency. The power company will send someone out to your house to check everything for energy efficiency. They will check to see if there is any air seeping in or out in your doors and windows, make sure your water heater is properly insulated, and test your power lines to make sure there are no circuits draining electricity, And, they will perform this check free of charge because it is also in their best interest to conserve energy wherever possible. The more power you and others needlessly drain from the entire grid means that much less good clean electricity that they can provide to all of their other customers and could ultimately lead to rolling brown-outs or black-outs.
One client had this check done by their power company done and found that their path to lower utility bills included replacing their portable air conditioning unit. It was constantly draining power, even when it was turned completely off. The absolute easiest thing that you can do to lower utility bills is make sure that your appliances are up to date. It will actually cost you more in the long run, to keep those old, inefficient appliances. And, when you go shopping to replace those appliances, pay extra attention to the energy efficiency rating when making your selection of new appliances and try to select the brand and model that has the highest efficiency rating.
Source: Stephen G. Anthony – a professional carpenter, woodworker and handyman based in New York City and South Florida.
Historic Home Renovation While Achieving Net-Zero Energy Consumption
In this video, witness an historic home renovation with the goal being net-zero energy consumption. Restoring this 110+ year-old Folk Victorian home, while making it ultra energy efficient, was accomplished through tight insulation & sealing, energy star appliances, motion sensors to turn off the lights when not in use, geothermal heating & cooling, and an energy monitor.
When the owners purchased this home, it was in terrible condition. It had lead paint, no insulation, and abestos siding. Run-down, carpet and tiling from the 70s… the list goes on and on. In other words, a dream come true for this husband and wife who happen to be renovation experts. It was a perfect “marriage”, so to speak, for this historic home renovation.
On move-in day, they brought a crowbar to rip up all of the old carpeting and a box of compact fluorescent light bulbs to replace all of the old, energy sucking light bulbs in the house. Then, they installed motion sensors to detect when nobody was in the room so that it would automatically turn off the lights when they were not needed.
Next, they tacked the bathroom which had old pink formica tiling and a toilet that used 5 gallons with every flush and still didn’t fully flush everything, if you know what I mean. They replaced the old toilet with a new caroma dual-flush toilet that uses only .8 gallons per flush and works every time. When completely done, this historic home renovation home will be capable of actually producing more energy than the owners would consume. This project should make history by being the oldest home in America to achieve net-zero energy consumption.
Restoring old homes does not have to be simply about preserving the past, it can also help by protecting our future.
Reducing Your Cost of Electricity through Energy Efficiency
The best way to help lower your cost of electricity is by being more energy efficient. To accomplish the goal of becoming more energy efficient, consider where your largest consumption of electricity may be and reduce that as much as possible, then move on to the next largest power drain in your home. Believe it or not, old refrigerators, old air conditioning window units, your water heater, and your electric garage door can be your largest energy hogs. To reduce your cost of electricity, you may need think about replacing that old refrigerator or air conditioning unit.
In apartments or condos where you typically cannot install a central air conditioning unit, many people resort to using those air conditioning units you can install in windows. As a general rule, they are not known for their energy efficiency. And, the older they are, the more they are increasing your cost of electricity. You need to replace those older window-based air conditioning units with one that is rated the highest for energy efficiency within your budget to get the most return on investment possible. Find out what the current efficiency rating is for the unit(s) you currently have and then compare to the efficiency rating to the models currently available at the local appliance stores. You may spend a couple of hundred dollars replacing that unit but you will more than make up for that initial outlay over the course of the next 1 to 3 summers with the money you will save in electricity. You will save a significant amount of money in the long run.
Another area that will save you a lot of money is your doors and windows – you would be absolutely amazed at how much energy you are literally losing through improperly insulated doors and windows. Properly insulating those doors and windows could quite possibly be the biggest reduction of your cost of electricity than all of the other energy saving measures you could possibly take combined.
Reducing your cost of electricity and energy efficient homes are measures you can take towards having a Green Home.
Disclaimer: EnergySelectContractors.com, its' owner, and writers (hereafter referred to as "we") makes no warranty, either express or implied. Nor, do we assume any legal liability or responsibility for the use, application of, and/or reference to opinions, advice, or recommendations included in this website or email responses to questions. The information on this website is considered "general". Consult your local building department or design professional to comply with local code, construction, and performance requirements. Because we have no control over the quality of workmanship or the vast climate conditions under which products are used, we cannot accept responsibility of product performance or installation designs.
